AD 2026-13-09: Pratt & Whitney Canada Corp. Engines

What the FAA requires

The FAA is adopting a new airworthiness directive (AD) for all Pratt & Whitney Canada Corp. (P&WC) Model PW210A, PW210A1, and PW210S engines. This AD was prompted by reports of circumferential cracks found at the turbine exhaust frame external surface caused by thermal stress from engine starts. This AD requires repetitive visual inspections of the turbine exhaust frame for cracks and, depending on the results of the inspections, replacement of the turbine exhaust frame. The FAA is issuing this AD to address the unsafe condition on these products.

Read the full directive on the Federal Register →

Applicability

This AD applies to all Pratt & Whitney Canada Corp. (P&WC) Model PW210A, PW210A1, and PW210S engines. (d) Subject Joint Aircraft System Component (JASC) Code 7250, Turbine Section. (e) Unsafe Condition This AD was prompted by reports of circumferential cracks found at the turbine exhaust frame external surface caused by thermal stress from engine starts. The FAA is issuing this AD to prevent failure of the turbine exhaust frame. The unsafe condition, if not addressed, could result in turbine exhaust frame failure, which could lead to loss of axial containment, release of parts, and damage to the helicopter. (f) Compliance Comply with this AD within the compliance times specified, unless alre

Part numbers this directive names

This directive does not name specific part numbers in its text; it applies by aircraft model. See the applicability above and the manufacturer's service bulletin it references.