AD 2026-17-07: Leonardo S.p.A. Helicopters

What the FAA requires

The FAA is adopting a new airworthiness directive (AD) for all Leonardo S.p.A. Model A109A, A109A II, A109C, A109K2, A109E, A119, and AW119 MKII helicopters; and certain Model A109S and AW109SP helicopters. This AD was prompted by a report of an incorrectly installed swashplate duplex bearing (bearing). This AD requires a one- time inspection of the bearing and depending on the result, corrective action. This AD also prohibits the installation of an affected bearing unless certain requirements are met. The FAA is issuing this AD to address the unsafe condition on these products.

Read the full directive on the Federal Register →

Applicability

This AD applies to Leonardo S.p.A. Model A109A, A109A II, A109C, A109K2, A109E, A109S, A119, AW109SP and AW119 MKII helicopters, certificated in any category, as identified in European Union Aviation Safety Agency (EASA) AD 2025-0148, dated July 11, 2025 (EASA AD 2025-0148). (d) Subject Joint Aircraft System Component (JASC) Code 6230, Main rotor mast/swashplate. (e) Unsafe Condition This AD was prompted by a report of an incorrectly installed swashplate duplex bearing (bearing). The FAA is issuing this AD to detect and correct improper installation of the bearing. The unsafe condition, if not addressed, could result in failure of the bearing and loss of control of the helicopter. (f) Compli

Part numbers this directive names (1)

Extracted from the directive text. For each: the NSN cross-reference where one exists, sellers listing it here, and open DLA solicitations on the NSN.