Home · NSN 00-569-6365
NSN 00-569-6365 — Gasket
NIIN 00-569-6365
NSN 00-569-6365 is the national stock number for a gasket. It cross-references to 1 manufacturer part number from 3 CAGE codes, including Honeywell International Inc., Proponent, Inc., Alliedsignal Inc Dba Allied-Signal Aerospace Co; the primary is 19738.
No government purchase of this stock number is on our record yet. No seller has confirmed stock of it here in the last 60 days; watching the number is free and the first listing triggers an alert.
1
part number from 3 CAGEs
0
open solicitations, all agencies
0
government buys in 24 months
0
sellers with confirmed stock
Cross-references
Part numbers filed against this stock number, with the manufacturer (CAGE) and the FLIS reference codes.
| Part number | CAGE | Manufacturer | Reference | Variation |
|---|---|---|---|---|
| 19738 | 70210 | Honeywell International Inc. | 3 · Design control (vendor) | 2 · Fully interchangeable |
| 19738 | 59789 | Proponent, Inc. | 5 · Secondary reference | 2 · Fully interchangeable |
| 19738 | 72599 | Alliedsignal Inc Dba Allied-Signal Aerospace Co | 5 · Secondary reference | 9 · Reference only |
Government demand
Nothing open right now. Watch this NSN and we will email you when it is solicited.
What the government paid
No government purchase on record for this NSN.
Sources: DLA DIBBS procurement history (unit cost), DLA award history, FPDS (all agencies), SAM.gov notices.
Sellers with confirmed stock
No seller has confirmed stock on this NSN in the last 60 days. Watch it and we will email you when one does, or request a quote on 19738.
Listings appear here only while the seller has confirmed them within 60 days. Sellers: list this part free.
Item characteristics
- Hole Diameter
- LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.260
- Overall Length
- INCHES MINIMUM 4.380 AND INCHES MAXIMUM 4.500
- Overall Width
- INCHES MINIMUM 11.220 AND INCHES MAXIMUM 11.280
- Center To Center Distance Between Bolt Holes Along Width
- LOCATION NOT OTHERWISE SPECIFIED INCHES NOMINAL 1.250
- Center To Center Distance Between Bolt Holes Along Length
- LOCATION NOT OTHERWISE SPECIFIED INCHES NOMINAL 1.000
- Outside Edge To Bolt Hole Center Distance Along Width
- INCHES MINIMUM 0.310 AND INCHES MAXIMUM 0.380
- Outside Edge To Bolt Hole Center Distance Along Length
- INCHES NOMINAL 0.585
- Cross-Sectional Thickness
- INCHES NOMINAL 0.062
- Special Features
- 4 APERTURES 1.500 IN. BY 4.440 IN.
- Material
- OVERALL RUBBER CHLOROPRENE CLASS CR AND ASBESTOS
- Material Document And Classification
- OVERALL MFR REF SINGLE MATERIAL RESPONSE 425FSC-70210
- Fsc Application Data
- OIL COOLER,ACFT
Related stock numbers
Other NSNs filed under the same part numbers.
- 00-108-9178 · Bearing,Ball,Annular
- 00-339-1686 · Pin,Straight,Headed
- 00-365-5911 · Contact,Electrical
- 00-454-9589 · Connector,Heater As
- 01-049-1507 · Shielding Gasket,Electronic
- 01-094-1345 · Resistor,Fixed,Wire Wound
- 01-218-4200 · Yoke,Castor
- 01-381-2298 · Nut,Self-Locking,Hexagon
About this page
An NSN is 13 digits: the 4-digit Federal Supply Class and the 9-digit NIIN. Cross-references come from the federal logistics record; demand from DLA DIBBS, SAM.gov and FPDS; ADs from the Federal Register. Refreshed nightly. Market Pulse shows the whole market.
Get the daily Market Pulse
New DLA RFQs, SAM.gov notices, yesterday's awards and FAA directives, weekday mornings. Free, one click to leave.