Home · NSN 01-360-3035
NSN 01-360-3035 — Screw,Cap,Socket Head
NIIN 01-360-3035
NSN 01-360-3035 is the national stock number for a screw,cap,socket head. It cross-references to 2 manufacturer part numbers from 2 CAGE codes, including Military Standards Promulgated By Military Departments Under Authority Of Defense Standardization Manual 4120 3-M, Federal Specifications Promulgated By General Services Administration Washington Dc; the primary is FF-S-86.
No government purchase of this stock number is on our record yet. 1 seller on PartsAndPlanes lists it with confirmed stock.
2
part numbers from 2 CAGEs
0
open solicitations, all agencies
0
government buys in 24 months
1
seller with confirmed stock
Cross-references
Part numbers filed against this stock number, with the manufacturer (CAGE) and the FLIS reference codes.
| Part number | CAGE | Manufacturer | Reference | Variation |
|---|---|---|---|---|
| MS16997-57L | 96906 | Military Standards Promulgated By Military Departments Under Authority Of Defense Standardization Manual 4120 3-M | 2 · Item ident. reference | 2 · Fully interchangeable |
| FF-S-86 | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | 4 | 1 · Not fully interchangeable |
Government demand
Nothing open right now. Watch this NSN and we will email you when it is solicited.
What the government paid
No government purchase on record for this NSN.
Sources: DLA DIBBS procurement history (unit cost), DLA award history, FPDS (all agencies), SAM.gov notices.
Sellers with confirmed stock
- MS16997-57L · 341 in stock · MW Components
Listings appear here only while the seller has confirmed them within 60 days. Sellers: list this part free.
Item characteristics
- Thread Class
- 3A
- Thread Direction
- RIGHT-HAND
- Thread Length
- INCHES MINIMUM 0.344 AND INCHES MAXIMUM 0.375
- Fastener Length
- INCHES MINIMUM 0.344 AND INCHES MAXIMUM 0.375
- Head Diameter
- INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.375
- Head Height
- INCHES MINIMUM 0.244 AND INCHES MAXIMUM 0.250
- Locking Feature
- THREADS PATCH OR STRIP
- Nominal Thread Diameter
- INCHES 0.250
- Width Across Flats
- INCHES MINIMUM 0.188 AND INCHES MAXIMUM 0.190
- Thread Quantity Per Inch
- 20
- Minimum Tensile Strength
- POUNDS PER SQUARE INCH 160000
- Hardness Rating
- OVERALL ROCKWELL C MINIMUM 38.0 AND ROCKWELL C MAXIMUM 45.0
- Material
- FASTENER STEEL
- Surface Treatment
- FASTENER CADMIUM AND CHROMATE
- Surface Treatment Document And Classification
- FASTENER FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CL 3
- Thread Series Designator
- UNIFIED NATIONAL COARSE (UNC)
Related stock numbers
Other NSNs filed under the same part numbers.
- 00-004-4040 · Screw,Cap,Socket Head
- 00-013-8277 · Screw,Cap,Socket Head
- 00-016-8257 · Screw,Cap,Socket Head
- 00-026-6552 · Screw,Cap,Socket Head
- 00-033-7683 · Screw,Cap,Socket Head
- 00-034-1149 · Bolt,Internal Wrenching
- 00-034-1162 · Screw,Cap,Socket Head
- 00-034-1217 · Screw,Cap,Socket Head
About this page
An NSN is 13 digits: the 4-digit Federal Supply Class and the 9-digit NIIN. Cross-references come from the federal logistics record; demand from DLA DIBBS, SAM.gov and FPDS; ADs from the Federal Register. Refreshed nightly. Market Pulse shows the whole market.
Get the daily Market Pulse
New DLA RFQs, SAM.gov notices, yesterday's awards and FAA directives, weekday mornings. Free, one click to leave.