Home · NSN 01-706-0745

NSN 01-706-0745 — Bolt,Shear

NIIN 01-706-0745

NSN 01-706-0745 is the national stock number for a bolt,shear. It cross-references to 2 manufacturer part numbers from 1 CAGE code, including National Aerospace Standards Committee Aerospace Industries Association Of America Inc Not For Rfq Or Solicitation Use; the primary is NAS1580 REV 15.

No government purchase of this stock number is on our record yet. No seller has confirmed stock of it here in the last 60 days; watching the number is free and the first listing triggers an alert.

2

part numbers from 1 CAGE

0

open solicitations, all agencies

0

government buys in 24 months

0

sellers with confirmed stock

Watch NSN 01-706-0745: an email the morning the government solicits or buys it, or an AD names it. Free.
Know someone who should see this?

Cross-references

Part numbers filed against this stock number, with the manufacturer (CAGE) and the FLIS reference codes.

Part numberCAGEManufacturerReferenceVariation
NAS1580C4R5P80205National Aerospace Standards Committee Aerospace Industries Association Of America Inc Not For Rfq Or Solicitation Use3 · Design control (vendor)2 · Fully interchangeable
NAS1580 REV 1580205National Aerospace Standards Committee Aerospace Industries Association Of America Inc Not For Rfq Or Solicitation UseD9 · Reference only

Government demand

Nothing open right now. Watch this NSN and we will email you when it is solicited.

What the government paid

No government purchase on record for this NSN.

Sources: DLA DIBBS procurement history (unit cost), DLA award history, FPDS (all agencies), SAM.gov notices.

Sellers with confirmed stock

No seller has confirmed stock on this NSN in the last 60 days. Watch it and we will email you when one does, or request a quote on NAS1580 REV 15.

Request NAS1580 REV 15

No account needed. Goes to the sellers who carry this number or its family.

Listings appear here only while the seller has confirmed them within 60 days. Sellers: list this part free.

Item characteristics

Thread Class
3A
Thread Direction
RIGHT-HAND
Thread Length
INCHES MINIMUM 0.373 AND INCHES MAXIMUM 0.433
Fastener Length
INCHES MINIMUM 0.700 AND INCHES MAXIMUM 0.730
Head Diameter
INCHES MINIMUM 0.464
Head Height
INCHES MINIMUM 0.081 AND INCHES MAXIMUM 0.141
Grip Diameter
INCHES MINIMUM 0.2485 AND INCHES MAXIMUM 0.2495
Nominal Thread Diameter
INCHES 0.2500
Grip Length
INCHES MINIMUM 0.3025 AND INCHES MAXIMUM 0.3225
Thread Quantity Per Inch
28
Minimum Tensile Strength
POUNDS PER SQUARE INCH 5790
Countersink Angle
DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0
Part Name Assigned By Controlling Agency
BOLT, SHEAR, 100 DEG FLUSH HEAD, OFFSET CRUCIFORM, OFFSET CRUCIFORM - RIBBED SLOT, 95 KSI FSU
Special Features
MATERIAL: CODE LETTER "C" FOLLOWING BASIC PART NUMBER INDICATES CRES A286. FINISH: CRES - CODE LETTER "P" FOLLOWING GRIP DASH NUMBER INDICATES CADMIUM PLATE. RECESS: CODE LETTER "R" FOLLOWING DIA DASH
Hazardous Substances
CADMIUM
Material
OVERALL STEEL CORROSION RESISTING
Material Document And Classification
OVERALL INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES A-S5731 OR INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES A-S5332
Surface Treatment
OVERALL CADMIUM
Surface Treatment Document And Classification
OVERALL INTERNATIONAL STD/SPEC ALL TREATMENT RESPONSES A-S-QQ--416, TYE II, CLASS 2
Thread Series Designator
UNIFIED NATIONAL JOINT FINE (UNJF)
Specification/Standard Data
PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 80205-NAS1580

Related stock numbers

Other NSNs filed under the same part numbers.

About this page

An NSN is 13 digits: the 4-digit Federal Supply Class and the 9-digit NIIN. Cross-references come from the federal logistics record; demand from DLA DIBBS, SAM.gov and FPDS; ADs from the Federal Register. Refreshed nightly. Market Pulse shows the whole market.

Get the daily Market Pulse

New DLA RFQs, SAM.gov notices, yesterday's awards and FAA directives, weekday mornings. Free, one click to leave.