Home · NSN 01-706-3545
NSN 01-706-3545 — Insert,Panel Fastener
NIIN 01-706-3545
NSN 01-706-3545 is the national stock number for an insert,panel fastener. It cross-references to 2 manufacturer part numbers from 1 CAGE code, including National Aerospace Standards Committee Aerospace Industries Association Of America Inc Not For Rfq Or Solicitation Use; the primary is NAS1836 REV 10.
No government purchase of this stock number is on our record yet. No seller has confirmed stock of it here in the last 60 days; watching the number is free and the first listing triggers an alert.
2
part numbers from 1 CAGE
0
open solicitations, all agencies
0
government buys in 24 months
0
sellers with confirmed stock
Cross-references
Part numbers filed against this stock number, with the manufacturer (CAGE) and the FLIS reference codes.
| Part number | CAGE | Manufacturer | Reference | Variation |
|---|---|---|---|---|
| NAS1836-08-12 | 80205 | National Aerospace Standards Committee Aerospace Industries Association Of America Inc Not For Rfq Or Solicitation Use | 3 · Design control (vendor) | 2 · Fully interchangeable |
| NAS1836 REV 10 | 80205 | National Aerospace Standards Committee Aerospace Industries Association Of America Inc Not For Rfq Or Solicitation Use | D | 9 · Reference only |
Government demand
Nothing open right now. Watch this NSN and we will email you when it is solicited.
What the government paid
No government purchase on record for this NSN.
Sources: DLA DIBBS procurement history (unit cost), DLA award history, FPDS (all agencies), SAM.gov notices.
Sellers with confirmed stock
No seller has confirmed stock on this NSN in the last 60 days. Watch it and we will email you when one does, or request a quote on NAS1836 REV 10.
Listings appear here only while the seller has confirmed them within 60 days. Sellers: list this part free.
Item characteristics
- Overall Length
- INCHES MINIMUM 0.362 AND INCHES MAXIMUM 0.382
- Flange Diameter
- INCHES MINIMUM 0.441 AND INCHES MAXIMUM 0.451
- Overall Diameter
- INCHES MINIMUM 0.441 AND INCHES MAXIMUM 0.451
- Sleeve Diameter
- INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.270
- Hole Type
- THREADED
- Features Provided
- POTTING HOLE OR POTTING SLOT
- Minimum Yield Strength
- KILOPOUNDS PER SQUARE INCH 85
- Flange Thickness
- INCHES MINIMUM 0.050 AND INCHES MAXIMUM 0.070
- Part Name Assigned By Controlling Agency
- INSERT, MOLDED IN, BLIND THREADED, SELF-LOCKING, LIGHTWEIGHT, SANDWICH PANEL
- Special Features
- SELF-LOCKING PER DASH AFTER FIRST DASH NUMBER. MATERIAL - CARBON STEEL PER ASTM A108, ASTM A576, OR MATERIAL COMPOSITION PER AIR4127, ULTIMATE TENSILE STRENGTH 85 KSI MINIMUM. FINISH - CADMIUM PLATE P
- Hazardous Substances
- CADMIUM
- Material
- OVERALL STEEL
- Material Document And Classification
- OVERALL INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES AST- A108 OR INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES AST- A576
- Surface Treatment
- OVERALL CADMIUM
- Surface Treatment Document And Classification
- OVERALL INTERNATIONAL STD/SPEC ALL TREATMENT RESPONSES A-S-QQ--416, TYE II, CLASS 2
- Thread Size And Series/Type Designator
- UNJC 0.1640-32 3B
- Specification/Standard Data
- PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 80205-NAS1836
Related stock numbers
Other NSNs filed under the same part numbers.
- 01-706-3547 · Insert,Panel Fastener
About this page
An NSN is 13 digits: the 4-digit Federal Supply Class and the 9-digit NIIN. Cross-references come from the federal logistics record; demand from DLA DIBBS, SAM.gov and FPDS; ADs from the Federal Register. Refreshed nightly. Market Pulse shows the whole market.
Get the daily Market Pulse
New DLA RFQs, SAM.gov notices, yesterday's awards and FAA directives, weekday mornings. Free, one click to leave.