Listing detail
- Condition
- NE - New
- Quantity
- 0 EA - Each
- Price
- Request a quote
- Location
- Beaufort, South Carolina
- Traceability
- New from authorized distributor
- Description
- SC3A Static Inverter | 28 VDC to 26 VAC, 400 Hz
SC3A Static Inverter | 28 VDC to 26 VAC, 400 Hz
1 listing from 1 seller. Every row is a live listing with a date; nothing here is a spreadsheet upload from years ago.
| Seller | CC | Qty | Price | Location | Trace | Updated | Proof | |
|---|---|---|---|---|---|---|---|---|
Leading Edge Group, LLC Verified on PartsAndPlanes since 2024 · K G S ELECTRONICS | NE | on request | RFQ | Beaufort, South Carolina | New from authorized distributor | 5d ago | 1 | Log in to request a quote |
Sorted: sponsored, then lowest price. Dates in amber are older than six months; ask the seller to confirm before you count on it.
FAA-PMA
PMA PQ1856NM. Approved as a replacement for 975.04.112 on Pilatus PC-12 (Inverter, 26vac) · Current, Mar 2015. · in stock here Leading Edge Group, LLC, quote
A PMA part is approved for the specific eligibility listed on its FAA record; whether it may be installed on a particular aircraft, engine or component is the installer's determination. This page states the FAA record and the listings on PartsAndPlanes.
K G S ELECTRONICS · Avionics › Inverters & Converters
SC3A Static Inverter | 28 VDC to 26 VAC, 400 Hz
The SC3A static inverters are pulse width modulated DC to AC static inverters that provide regulated 400 Hz power up to 30 volt amps. An internal trim pot is provide to adjust the output voltage to 10%. The circuit protection of the SC3A includes low input voltage, soft start, high input voltage shutdown, output over voltage limit, and output short circuit current limit.
Weight:
1 lb (454 g)
Dimensions:
2.00 x 3.18 x 5.00 in (50.8 x 80.8 x 127.0 mm)
Input Voltage:
24–32 VDC (28 VDC nominal); 18–36.4 VDC (abnormal range)
Input Current:
1.35 A at 28 VDC (typical); 0.6 A at no load (max)
Output Voltage:
26 VAC
Output Current:
1.15 A (continuous)
Frequency:
400 Hz ± 1%
Distortion (THD):
3% at 28 VDC (typical at FL); 7% (maximum for the input range & pf)
Isolation:
Output is isolated from input
Power:
30 VA (max)
Power Factor:
0.95 leading to 0.8 lagging power factor
Regulation:
Load: 3%
Line: 2%
Temperature: 3%
Overload (OL):
Deliver 150% output current for 5 min.
Protection (OL):
Withstands without damage or degradation load exceeding 150% to an output short circuit. Unit delivers rated output power upon removal of the overload condition
Protection (SC):
Under a output short circuit condition, the input current folds back and the output current is limited to a safe value
Protection (OV):
Output voltage is limited to 145 VAC maximum
Soft-Start:
Minimum soft start delay of 100 mSec at full load is provided during an application of step input voltage to reduce output in rush current
Shutdown (SD):
Output shuts down when input voltage is below 14 VDC and above 36.4 VDC
Temperature:
-55°C to 71°C
Altitude:
55,000FT
Compliance:
FAA TSO-C73
Connector:
Unit mates with MS3106A14-6S
Finish:
Gold iridite per MIL-C-5541 Class 1A
Product content supplied by Leading Edge Group, LLC · available on request from an authorized distributor. Every listing is dated.
Get the daily Market Pulse
New DLA RFQs, SAM.gov notices, yesterday's awards and FAA directives, weekday mornings. Free, one click to leave.